by Centro Cornici
Non sono presenti prodotti all'interno del carrello
Inizia a creare adesso la tua cornice su misura.
Scegliere la nazione dove si vuole spedire la merce.
Italia
Francia
Germania
Belgio
Lussemburgo
Paesi Bassi
Austria
Caricamento in corso ...
We start by saying that the frame can come in different versions:
1. Empty frame
2. Flush frame (glass + bottom)
3. Frame with passe-partout in cardboard cut at 45° (with glass + bottom)
4. Frame with wooden passe-partout (with elastic bands to fix the canvas)
5. Frame with mirror
6. Aluminium frame
7. American box frame
What to do in case of flush frame.
1. Raise the slats (metal hooks that can be opened and closed and are already fixed to the wood) with a fingernail or kitchen knife so that you can insert your subject.
2. Lift up the background cardboard that you find inside the frame.
3. Insert your picture and replace the cardboard.
4. Close the flaps by repositioning them as you found them.
[* THE GLASS OR PLEXIGLASS SHIPPED IS ALREADY CLEANED AND ASPIRATED.]
What to do in case of a frame with a 45° cardboard passepartout.
1. Lift the slats (metal hooks that can be opened and closed and are already fixed to the wood) with a fingernail or kitchen knife so that the cardboard and the passepartout can be removed.
2.
2. Holding the cardboard as a base, fix your picture or pictures to the passepartout, securing it with paper tape.
3. Gently put the picture with the passepartout back into the frame and seal it with the cardboard, closing the flaps as you found them.
[* THE SHIPPED GLASS OR PLEXIGLASS IS ALREADY CLEANED AND ASPIRATED.]
What to do in case of a frame with wooden passepartout.
We would like to point out that this option is suitable for all rigid media such as canvas and canvas board.
1. Lift the slats as shown in the framing with passepartout at 45° and pull out.
2. Raise the rubber bands in the four corners of the wooden passepartout and insert your subject (painting on canvas)
3. Raise the slats and insert the painting and close the slats of the passepartout (painting on canvas)
4. In this framing it is necessary to indicate in the notes if your subject is on canvas or on a lower support such as canvas board or plywood.
[* THIS TYPE OF FRAMING DOES NOT REQUIRE THE PURCHASE OF GLASS.
How to assemble your ALUMINIUM picture frame (NIELSEN)
If you have purchased an empty NIELSEN picture frame, it will come disassembled with an assembly kit. The kit consists of: 4 corner pieces, 2 clips and 8 springs for attaching the back to the frame. All you need is a flat screwdriver.
1. Screw the corners together to create the 4 corners of the frame
2. Screw the brackets on the side where the frame will be placed (horizontal or vertical)
What to do in case of frame with mirror.
1. The frame with mirror will arrive already assembled and ready to hang.
How to assemble your AMERICAN CASSETTE FRAME
1. Screw in the screws from the back so that they protrude slightly from the front.
2. Place the frame (or rigid support) in the correct position inside your frame.
3. Fasten the screws (also using a drill).
Our team of craftsmen is ready to make your customised frame. Only by using high-quality materials will you get a high-quality frame. Trust the experts in picture frames online.
English 